Your cart (0)
Your cart is empty
Tax included and shipping calculated at checkout
Apex
2 to 60 g · ABEC 9
€27,95Set of 2
Spool bearings for Daiwa Tatula TW 300 (2021)
Made as 300, in XH.
The Daiwa Tatula TW 300 (2021) runs on two spool bearings: 5x11x4 + 3x10x4. Every set below is this exact pair.
Spool bearings5x11x4 + 3x10x4
Our pick: Edge
The all-rounder for this reel: ceramic speed with the durability of steel.
Our pick for this reel
Edge
5 to 100 g · ABEC 9
€22,95Set of 2
Core
8 to 200 g · ABEC 5
€17,95Set of 2
Needed for this reel
The spool bearing sits behind a pin. This tool pushes it out without damage.
€19,95
Versions of this reel
All versions of the Daiwa Tatula TW 300 (2021) take the same spool bearings. You find the model code on the reel foot or on the box.
| Version | Size | Hand | Gear | Model code |
|---|---|---|---|---|
| 300XHL | 300 | left hand | XH | 630106 |
| 300XH | 300 | right hand | XH | 630105 |
| 300L | 300 | left hand | 630102 | |
| 300 | 300 | right hand | 630101 |
Three classes. Which one is yours?
Our pick follows what your reel is built for.
- Apex
Maximum performance. The best bearings we make for reels built for light lures.
- 2 to 60 g
- ABEC 9
- S30 ceramic
- Edge
The all-rounder. Right between performance and durability, for most bass, zander and pike setups.
- 5 to 100 g
- ABEC 9
- S25 hybrid ceramic
- Core
Built to take a beating. Full stainless and shielded, made for big bait anglers and hard daily use.
- 8 to 200 g
- ABEC 5
- Stainless steel
Lure weight is a recommendation, not a load limit
The ranges show what we recommend each class for, based on what your reel is built for. The load capacity of the bearings goes far beyond that: Apex handles up to 150 g, Edge over 250 g, Core over 500 g.
Your reel sets the limit
How much load a reel can take is decided by the reel itself: spool, gears, drag and body. The bearings play a minor part. The right bearings help you cast lighter lures further, but they do not raise the load capacity of your reel.
Other Tatula reels
Dot = our pick:ApexEdgeCore
Tatula BF TW (2026)8.1:13x10x4 + 3x6x2.5
Tatula TW 200 (2025)200 · H, XH3x10x4 + 3x8x4
Tatula SV TW 100 (2024)100 · H, XH3x10x4 + 3x8x4
Tatula TW 100 (2024)100 · H, XH3x10x4 + 3x8x4
Tatula SV TW 70 (2023)6.3:1, 7.1:1, 8.1:13x10x4 + 3x8x4
Tatula 200 (2022)200 · H, HS3x10x4 + 3x8x4
Tatula TW 80 (2022)80 · H, XH3x10x4 + 3x8x4
Tatula SV TW 103 Limited (2021)103 · H3x10x4 + 3x8x4
Tatula TW 400 (2021)400 · H, XH5x11x4 + 3x10x4
Tatula 300 (2020)300 · P, H, HS, XS5x11x4 + 3x10x4
Tatula SV TW 103 (2020)103 · H, HS, XS3x10x4 + 3x8x4
Tatula Elite 100 (2019)100 · H, HS, XS3x10x4 + 3x8x4
Tatula TW 100 (2019)100 · H, SH, XH3x10x4 + 3x8x4
Tatula 100 (2018)100 · H, HS, XS3x10x4 + 3x8x4
Tatula 100 TW (2017)100 · H, SH3x10x4 + 3x8x4
Tatula SV TW (2017)6.3:1, 7.3:1, 8.1:13x10x4 + 3x8x4
What anglers say
What anglers say after the swap.
-
The spool just keeps spinning
“Thought there was a motor built in, it just does not stop spinning.”
-
Better than new
“Fitted my old Quantum KVD with new bearings. The thing performs better than new. I am thrilled.”
-
A different league from stock
“The result is a reel from another planet! No comparison to the factory condition, you will not regret this purchase.”
30-Day Performance Boost Guarantee
If you do not feel a clear difference in spool start-up, casting or overall performance within 30 days, send the bearings back. Valid for all three classes.