Baitcaster Reel Tool Kit

Sale price €44,95 EURRegular price
Regular price €44,95 EUR
Tax included. Shipping calculated at checkout.

In stock, ready to ship

  • Packed and shipped from our workshop in Berlin
  • Shipping cost for your country shown in the cart
EU harmonised notice on the legal guarantee of conformity
The tools you need to open a baitcasting reel, change the bearings and close it again without marks, in one hard case.

Baitcaster Reel Tool Kit

Open black case of the Baitcaster Reel Tool Kit with tweezers, a brush and other black tools in gray foam, plus two small boxes

The tools you need to open a baitcasting reel, change the bearings and close it again without marks, in one hard case.

  • Pin remover for the cross pin in the spool shaft
  • Pick tool for bearings and knob caps
  • Lock nut wrench for the handle nut
  • Screwdriver with 7 bits for the common reel screws
  • 2.5 mm hex key
  • Bearing check tool
  • Precision tweezers and cleaning brush

Everything sits in an ABS hard case with cut foam, so nothing rattles at home or on the road.

Maintenance and installation are at your own risk.

Everything in one case

The tools for a clean bearing swap.

Baitcasters have small screws, tight fits and parts that do not forgive the wrong tool. This case holds what you need to open a reel, change the bearings and close it again without marks.

  • 6 toolsplus tweezers and brush
  • 7 bitsfor the common reel screws
  • Pin removerincluded in the case
  • Hard caseABS with cut foam, nothing rattles

In the case

What each tool does.

  • Pin remover

    Presses the cross pin out of the spool shaft so you reach the bearing behind it, and presses it back in straight.

  • Pick tool

    Lifts bearings and knob caps out without scratching them.

  • Lock nut wrench

    Fits the handle nut, so the handle comes off without rounding the edges.

  • Screwdriver with 7 bits

    Covers the common screws on side plates, handles and knobs.

  • 2.5 mm hex key

    For hex screws and fine adjustment work.

  • Bearing check tool

    Hold a bearing on it and spin it. You feel at once if it runs rough.

  • Tweezers and brush

    For small parts and for cleaning out old grease and dirt.

Good to know: oil and grease are not in the case. For the bearings you find the matching oil in our shop. Maintenance and installation are at your own risk.

FAQ

Questions about the tools

Does my reel need a pin remover?

Only if a spool bearing sits behind a pin on the spool shaft. Type your reel into the bearing finder. It tells you if your reel is one of them.

Is the pin remover part of the tool kit?

Yes. The Baitcaster Reel Tool Kit includes a pin remover. If you only need to get the pin out, the single pin remover is enough.

Which reels do the tools fit?

The tools are made for baitcasting reels. Bits, wrench and hex key cover the common screws and handle nuts.

Is there a manual?

No. Every reel comes apart a little differently. If you service your own reels you will know your way around. Maintenance and installation are at your own risk.